How to Remove a Tree Stump Easily and Fast

This article teaches you how you can get rid of a tree stump.  This system is effective and safe, and does not expect a good deal of labour.  However, you need to be patient.  The procedure can take a few weeks.

Tools Required

1. 12 in. bit extension
2. Ax
3. Corded drill
4. Extension cord
5. Safety glasses

Step 1 - Drill Holes In the Stump

• Cut off up to Their top of the stump as You Can. 
• Working with a one-inch spade bit using a spade little extension, drill pins around the outside of the stump approximately 12 inches deep and three to four inches back from the border.  
• Drill holes to four inches from the rim in a 45-degree angle to attach with the additional holes.  They will provide port holes for burning off or assist the rotting process.  

Step 2- Put Chemicals in Tree Stump

• Fill tree stump removal chemicals to each of the holes and then fill them with water.
• The procedure requires four to fourteen days.
• You may also try a natural method using epsom salt stump removal.
• Subsequently you may break out the wood with an ax.

Step 3- Attempt a Electricity Stump Grinder

• Rent a electricity stump grinder to remove a stump fast.

Step 4- Eliminate theTree Roots

• To get an entirely labor-free elimination, some producers of tree stump removal compounds suggest burning what's left of this stump by pouring kerosene or gas (never gas ) to the holes.
• Wait till the liquid fully penetrates the timber (this may take a couple weeks). Then drop a fit to the holes to initiate the procedure that is burning.
• The stump will smolder for days, finally leaving a charcoal-filled hole.
• It is dangerous using a giant, smoldering ember in your lawn, so some steps are in order. Envelop the stump in chicken wire, remove all leaves and also keep your eye on it!
• We propose the ax way of completing the job. Manual tree stump removal functions just on experienced (older) stumps which have been dead for a year or so, not cut tree stumps.